M42 Hole Cutters 16mm to 200mm

1.100% brand new and high quality.
2.The drill bit, made of bi-metal, is stronger , good toughness and safe to use.
3.Use for opening holes on wood products, composite boards, PVC board, gypsum board, environmental materials , stainless steel,iron, aluminum alloy ect.
4.Special tooth design, making the process of clean up the debris more smoothly, and the cutting efficiency higher.
5.Accurate concentricity makes cut smoothly, improves the quality and accuracy of the opening work, extends its service life.
6.Suit for most Bench drill, Electric drill.

Specification Drill Easy M42 Hole Cutters 16mm-200mm
Material: M42 HSS.
Use for: Wood / Plastic / Stainless Steel / Aluminium Alloy / PVC ,ect
Cutting Diameter: Drill Diameter Size: 16mm- 200mm (1-2mm measure error and slight flaws are allowed.)
Speed:depends on the material of drilling,please use lower speed at frist.
Color:color may be changed.

1. Drill Easy M42 Hole Cutters 16mm 200mm make sure the center of the drill on the pipe or board before drilling.Keep 90 degrees.
2. The drill bit is suit for 0.5-10mm thick aluminum or iron pipe / board ;0.5-25mm thick plastic pipe / wood.
3. If you use on the metal and other hard material ,please remember to use the oil / water to low the temperature,otherwise,the drill bit will be broken due to high temperature.
4. drill depth > 10mm ,please take off the spring.

0-100mm – Go to our eBay shop

105-200mm – Go to our eBay shop